Transfer Station Compactors

Bakers Waste Equipment manufactures Transfer Station Compactors in various sizes, allowing you to choose the one that best fits your requirements. Our available sizes include:

• 12-Cubic Yards (S1200 12YD Transfer Station Compactor)
• 13-Cubic Yards (S1300 13YD Transfer Station Compactor)
• 14-Cubic Yards (S1400 14YD Transfer Station Compactor)
• 15-Cubic Yards (S1500 15YD Transfer Station Compactor)

S1200 (12yd) Transfer Station Compactor

General Compactor Specifications:

• Dimensions – 317” overall length x 94” overall width x 77” overall height
• Clear top dimension – 106” x 80”
• Discharge – 80” wide x 60” high
• Ram Face – 80” wide x 48” high
• Ram Penetration – 30”

Performance Specifications:

• Ram Force – 142,000 lbs Normal / 230,000 Max Boost
• Ram Cylinders – (2) 7” bore x 5” rod cylinders x 141 ” stroke
• Ram Cycle Time – 32 seconds

Hydraulic Specifications:

• System Pressures – 1850 psi Normal / 3000 psi Max Boost
• Pump Capacity – 156 gpm multi stage (68/54/34)
• Reservoir Capacity – 350 gallons
• 5HP Cooling System w/Kidney Loop
• Reservoir capacity – 350gal with internal baffles to provide cooling capability without the use of a separate circulation pump and heat exchanger

Electrical Specifications:

• UL listed panel box (NEMA 3R or higher)
• Operation Voltage – TBD, 3ph
• Control Voltage – 120V . 24 VDC
• Motor – 60 HP, Tri-volt motor, 3 ph
• Power Unit Operating System – Koyo Click PLC
• Standard Controls on remote pendant control and power unit
• Standard Controls include key start switch, red mushroom E-stop button, reverse button, 80% full warning light

S1500 (15yd) Transfer Station Compactors

General Compactor Specifications:

• Dimensions – 354” overall length x 94” overall width x 85” overall height
• Clear top dimension – 126” x 80”
• Discharge – 82” wide x 62” high
• Ram Penetration – 39”

Performance Specifications:

• Ram Force – 142,000 lbs Normal / 230,000 Max Boost
• Ram Cylinders – (2) 7” bore x 5” rod cylinders x 165 ” long
• Ram Cycle Time – 35 seconds

Hydraulic Specifications:

• System Pressures – 1850 psi Normal / 3000 psi Max Boost
• Pump Capacity – 156 gpm multi stage (68/54/34) w/ Regen Hydraulics
• Reservoir Capacity – 350 gallons
• 5HP Cooling System w/Kidney Loop
• Reservoir capacity – 350gal with internal baffles to provide cooling capability without the use of a separate circulation pump and heat exchanger

Electrical Specifications:

• UL listed panel box (NEMA 3R or higher)
• Operation Voltage – TBD, 3ph
• Control Voltage – 120V . 24 VDC
• Motor – 60 HP, Tri-volt motor, 3 phase
• Power Unit Operating System – Koyo Click PLC
• Standard Controls on remote pendant control and power unit
• Standard Controls include key start switch, red mushroom E-stop button, reverse button, 80% full warning light